Made in Turkey Engineered & Manufactured in Türkiye · Delivered Worldwide
+90 505 507 04 18
EN DE IT FR
Upload Your Project
Direct Factory Export from Türkiye · 0% Customs Duty (A.TR / FTA)

Custom Steel Frame Villas in The Netherlands (BENG Energy & Eurocode Certified)

Factory-direct delivery across Amsterdam, Rotterdam, The Hague, Utrecht, and coastal provinces. Engineered for high North Sea wind loads, BENG nearly-zero-energy compliance, light foundation loads on soft soils, and 0% customs duty via A.TR.

Transit Duration
4–5 Days
Direct road / ferry to jobsite
Customs Tariff
0% Duty
A.TR / FTA Movement Cert.
Structural Code
Eurocode / NEN-EN
Eurocode 1, 3 & 8 Certified
Site Support
Supervision
Bilingual field engineers
SerVilla Steel Villas in The Netherlands
Custom Light Gauge Steel Architectural Solutions for The Netherlands
Export Logistics & Freight

Seamless Factory-to-Jobsite Delivery in The Netherlands

All steel frame structures are manufactured at our factory in Gebze (Istanbul) and transported directly to your jobsite in The Netherlands. Components are flat-packed in high-cube mega TIR trailers or 40ft maritime containers.

Primary Freight Route & Transit Duration
4–5 Days via Direct Mega-Trailer TIR Road Freight (13.6m Covered Flatbed) (Gebze Industrial Corridor / Istanbul Export Hub → Direct DAP delivery to Amsterdam, Rotterdam, Utrecht, Eindhoven, Groningen, and Zeeland jobsites). Full tracking provided with driver GPS coordinates upon border departure.
Customs Clearance & Documentation
0% Customs Duty under EU–Türkiye Customs Union (A.TR Movement Certificate). SerVilla manages export clearance in Türkiye and coordinates with your local customs broker.
Jobsite Unloading & Packaging
Curtainsider mega-trailer with crane slings or jobsite telehandler offloading in 90 min. Bundles are weather-wrapped in high-density polyethylene and sequentially coded to match the 3D erection model.
Request Delivered Quote (The Netherlands) Compare Delivery Packages
Technical Dossier

Certified Engineering Standards

Structural & Cold-Formed Steel Code
NEN-EN 1993-1-3 with Dutch National Annex & EN 1090-2 (EXC2)
Seismic & Dynamic Engineering
NPR 9998 (Groningen Induced Earthquake Zone Verification when required)
Wind Pressures & Snow Load Verification
NEN-EN 1991-1-4 (North Sea Coastal Wind Area I, II & III)
Thermal Efficiency Standard
BENG 1/2/3 (Bijna Energieneutrale Gebouwen) & NTA 8800 Energy Label A++++
Certified Raw Material
S350GD + Z275 Hot-Dip Galvanized Structural Steel (EN 10346)
Transparent Project Boundaries

Permitting & Engineering Scope in The Netherlands

Clear division of responsibility between the Turkish manufacturing plant and your local licensed building professional.

Supplied by SerVilla Engineering

  • ✓ Complete Eurocode 1/3/8 Structural Static Calculation Book (3D finite-element stress & deflection checks)
  • ✓ Foundation Reaction Schedule & Anchor Bolt Blueprint with exact line/point loads (kN/m and kN)
  • ✓ Step-by-step 3D Axonometric Assembly Manuals matching inkjet-printed profile IDs
  • ✓ EN 1090-2 Factory Production Control CE Certificates and EN 10204 3.1 Mill Test Reports
  • ✓ BIM IFC / Revit 3D structural model for architectural coordination

Handled by Your Local Licensed Engineer

  • • Official building permit filing with local municipal planning authorities (*Comune*, *Bauamt*, *Mairie*, *Council*)
  • • Local geotechnical soil investigation (*relazione geologica*, *Baugrundgutachten*)
  • • Concrete foundation slab excavation and pouring according to SerVilla anchor layout
  • • Local utility connections (water, sewer, electrical grid, HVAC commissioning)
  • • Site health and safety coordination (*Direttore dei Lavori*, *Sicherheitskoordinator*)
Permit Note for The Netherlands: SerVilla provides the complete structural calculation book (constructieberekening), 3D BIM models, and foundation load schedules. Your licensed Dutch structural engineer (constructeur) or architect submits the package to the municipality (Gemeente) for the Omgevingsvergunning.
Curated Designs

Recommended Villa Models for The Netherlands

Architectural layouts engineered for the climate, topography, and aesthetic expectations of The Netherlands.

SFV-188D Two-Storey High-Performance Villa
SFV-188D 188 m²

SFV-188D Two-Storey High-Performance Villa

High-performance 188 m² steel villa with 5 bedrooms, extensive glass facade, open-plan chef kitchen, upper lounge and expansive terrace surfaces.

2 Storeys 5 Beds 3 Baths
SFV-136D Two-Storey Modern Villa
SFV-136D 136 m²

SFV-136D Two-Storey Modern Villa

Contemporary 136 m² two-level residence with expansive ground floor glass front, upper floor master suite with balcony and 2 additional bedrooms.

2 Storeys 3 Beds 2.5 Baths
SFV-287D Two-Storey Luxury Pool Villa
SFV-287D 287 m²

SFV-287D Two-Storey Luxury Pool Villa

Substantial 287 m² modern luxury steel villa with double garage, 5 bedroom suites, expansive poolside terrace portals and double-height living room void.

2 Storeys 5 Beds 4 Baths
SFV-124S Single-Storey Architectural Villa
SFV-124S 124 m²

SFV-124S Single-Storey Architectural Villa

Spacious 124 m² single-floor architectural villa offering master suite with dressing, 2 secondary bedrooms, grand living salon and wrap-around covered veranda.

1 Storey 3 Beds 2 Baths
SFV-189S Luxury Pool Single-Storey Estate
SFV-189S 189 m²

SFV-189S Luxury Pool Single-Storey Estate

Luxury 189 m² single-level pool residence offering 5 bedrooms, seamless indoor-outdoor living flow, chef kitchen, and panoramic poolside terrace.

1 Storey 5 Beds 3 Baths
Local FAQ

Frequently Asked Questions: The Netherlands Delivery

Everything you need to know about shipping routes, building regulations, customs, and site erection in The Netherlands.

A light gauge steel villa weighs up to 70% less than a conventional concrete or brick house. This drastic weight reduction significantly reduces foundation piling depth, pile diameter, and ground settlement risks on delicate Dutch peat and clay soils, saving thousands of Euros in civil earthworks.

Our multi-layer thermal envelopes feature continuous exterior rockwool insulation, BoardeX vapor barriers, and triple-glazed Argon-filled window systems, achieving wall thermal resistance values of Rc ≥ 4.7 m²K/W and roof values of Rc ≥ 6.3 m²K/W, effortlessly surpassing BENG 1/2/3 requirements.

Shipments depart directly from our Gebze facility on 13.6m mega-trailers and arrive at your Dutch jobsite within 4 to 5 days. Under the official A.TR Movement Certificate, the building kit is completely exempt from EU customs duty (0% import tariff).

Start Your Steel Villa Project in The Netherlands

Upload your architectural drawings (PDF/DWG/IFC) or select a SerVilla model to receive an itemized budgetary quotation, Eurocode engineering assessment, and direct jobsite shipping breakdown.

Request Project Quotation (The Netherlands) Explore Other European Markets