Millimeter-exact 3D isometric assembly blueprints. Every panel, truss, and stud is color-coded and numbered matching the automated inkjet markings printed on the steel.
Millimeter-precise installation blueprints with unique piece labeling, connection nodes, and anchoring details for zero jobsite error.
The assembly dossier is structured in intuitive chronological phases: Phase 1 Ground Track Anchoring, Phase 2 Wall Panel Erection, Phase 3 Floor Joist Placement, Phase 4 Roof Truss Mounting.
Every single stud, nogging, and brace printed in our Gebze factory carries an alphanumeric label (e.g. W101-S04) that directly matches the 3D drawing callout, eliminating all guesswork on site.
Large-scale 2D/3D zoom details specify exact screw spacing, hold-down bracket orientations, truss gusset plate fasteners, and expansion anchor embedment depths.
Dive deeper into our Eurocode static calculations, 3D assembly plans, BOM schedules, and municipality permit assistance.
Full structural calculation dossiers verified strictly according to EN 1990, EN 1991 (Wind/Snow), EN 1993-1-3 (Cold-Formed Steel), and EN 1998 (Seismic). Ready for municipal stamping.
Explore TopicEvery single profile, structural screw, chemical anchor, hold-down bracket, and sheathing board is itemized with precise quantities, weights, and EN 10204 3.1 batch certifications.
Explore TopicReview a complete sample engineering deliverable pack for a 2-storey luxury steel frame villa: Eurocode static calculation excerpt, 3D assembly manual pages, foundation reaction schedule, and BOM.
Explore TopicFrom architectural concept to factory floor with zero translation errors. Automated clash detection, MEP service chaseways, and direct NC export to multi-axis roll-formers.
Explore TopicExact point loads, continuous line loads (kN/m), overturning moment reactions, and anchor bolt positioning coordinates delivered 3–4 weeks prior to steel shipment.
Explore TopicStreamline your planning approval across Germany (Bauantrag), Italy (Permesso di Costruire/SCIA), France (Permis de Construire), the UK, and Greece with our multilingual engineering desk.
Explore TopicAlready have architectural drawings from your local architect? Our structural engineering department converts your bespoke DWG, PDF, or IFC blueprints into Eurocode-compliant cold-formed steel frames with zero compromise to your architectural vision.
Explore TopicEngineered for extreme coastal hurricane gusts (up to 250 km/h), high Alpine snow accumulations (≥ 3.5 kN/m²), and high seismic ground accelerations (PGA ≥ 0.40g) across Europe.
Explore TopicClear technical answers regarding calculations, drawings, and regulatory submission.
Yes. Our 3D visual manuals are intentionally designed like high-precision modular assembly kits. Any competent construction crew with standard tools (screw guns, impact drivers, levels) can erect the frame flawlessly.
Every stud, track, and truss chord is printed at the factory with high-contrast inkjet alphanumeric markings (e.g., W102-S05 for Wall 102, Stud 05) that correspond 1:1 with the color-coded 3D visual blueprints, eliminating any confusion on site.
Only standard construction tools: 18V cordless impact drivers, magnetic level bars, laser alignment levels, tape measures, and socket sets. No welding machines, heavy cutting torches, or heavy cranes are required.
Upload your architectural drawings (PDF/DWG/IFC) to receive a structural feasibility evaluation, foundation interface loads, and manufacturing cost schedule.