Exact point loads, continuous line loads (kN/m), overturning moment reactions, and anchor bolt positioning coordinates delivered 3–4 weeks prior to steel shipment.
Accurate axial, shear, and uplift reaction schedules delivered early to optimize reinforced concrete slab design.
While steel framing is roll-formed in our Gebze factory, your local groundwork contractor receives full foundation reaction diagrams, enabling slab casting and curing without project delays.
Every shear wall connection node is documented with Dead (G), Live (Q), Wind (W), and Seismic (E) load combinations, providing local civil engineers with exact data for slab reinforcement design.
Clear architectural detail drawings indicate the required perimeter slab rebate (e.g. 50x50mm recess), DPC bitumen moisture barriers, and thermal insulation upstands.
Dive deeper into our Eurocode static calculations, 3D assembly plans, BOM schedules, and municipality permit assistance.
Full structural calculation dossiers verified strictly according to EN 1990, EN 1991 (Wind/Snow), EN 1993-1-3 (Cold-Formed Steel), and EN 1998 (Seismic). Ready for municipal stamping.
Explore TopicMillimeter-exact 3D isometric assembly blueprints. Every panel, truss, and stud is color-coded and numbered matching the automated inkjet markings printed on the steel.
Explore TopicEvery single profile, structural screw, chemical anchor, hold-down bracket, and sheathing board is itemized with precise quantities, weights, and EN 10204 3.1 batch certifications.
Explore TopicReview a complete sample engineering deliverable pack for a 2-storey luxury steel frame villa: Eurocode static calculation excerpt, 3D assembly manual pages, foundation reaction schedule, and BOM.
Explore TopicFrom architectural concept to factory floor with zero translation errors. Automated clash detection, MEP service chaseways, and direct NC export to multi-axis roll-formers.
Explore TopicStreamline your planning approval across Germany (Bauantrag), Italy (Permesso di Costruire/SCIA), France (Permis de Construire), the UK, and Greece with our multilingual engineering desk.
Explore TopicAlready have architectural drawings from your local architect? Our structural engineering department converts your bespoke DWG, PDF, or IFC blueprints into Eurocode-compliant cold-formed steel frames with zero compromise to your architectural vision.
Explore TopicEngineered for extreme coastal hurricane gusts (up to 250 km/h), high Alpine snow accumulations (≥ 3.5 kN/m²), and high seismic ground accelerations (PGA ≥ 0.40g) across Europe.
Explore TopicClear technical answers regarding calculations, drawings, and regulatory submission.
We supply 100% of the superstructure reaction loads, anchor coordinates, and perimeter slab geometry. Your local licensed civil engineer designs the internal concrete rebar reinforcement calibrated to your local soil bearing capacity report.
The blueprint provides exact point loads (vertical compression & uplift tension in kN), continuous distributed wall line loads (kN/m), overturning moment vectors, and millimeter-precise anchor bolt drill coordinates.
We specify and supply CE-certified M12/M16 heavy-duty chemical injection anchors (Hilti/Fischer equivalent) or mechanical expansion anchor bolts along with Simpson Strong-Tie seismic hold-down brackets rated for design uplift forces.
Upload your architectural drawings (PDF/DWG/IFC) to receive a structural feasibility evaluation, foundation interface loads, and manufacturing cost schedule.