European certified steel fabrication quality assurance: Mill Test 3.1 certificates, laser dimensional tolerances, and Declaration of Performance (DoP).
Strict European manufacturing quality management: audited factory production control, laser tolerances, and full material batch traceability.
All structural light gauge steel framing members and primary structural connections are manufactured in full compliance with EN 1090-2 Execution Class 2 (EXC2) for residential villas and EXC3 for commercial or seismic multi-storey assemblies.
Every coil batch of S350GD+Z275 structural steel is accompanied by manufacturer 3.1 inspection certificates guaranteeing chemical purity, yield strength (fy ≥ 350 MPa), elongation, and 275 g/m² zinc layer density.
Every shipment is issued an official Declaration of Performance (DoP) under the European Construction Products Regulation (CPR 305/2011), enabling direct acceptance by municipal building authorities and structural control bureaus across the EU.
Dive deeper into our Eurocode static calculations, 3D assembly plans, BOM schedules, and municipality permit assistance.
Full structural calculation dossiers verified strictly according to EN 1990, EN 1991 (Wind/Snow), EN 1993-1-3 (Cold-Formed Steel), and EN 1998 (Seismic). Ready for municipal stamping.
Explore TopicMillimeter-exact 3D isometric assembly blueprints. Every panel, truss, and stud is color-coded and numbered matching the automated inkjet markings printed on the steel.
Explore TopicEvery single profile, structural screw, chemical anchor, hold-down bracket, and sheathing board is itemized with precise quantities, weights, and EN 10204 3.1 batch certifications.
Explore TopicReview a complete sample engineering deliverable pack for a 2-storey luxury steel frame villa: Eurocode static calculation excerpt, 3D assembly manual pages, foundation reaction schedule, and BOM.
Explore TopicFrom architectural concept to factory floor with zero translation errors. Automated clash detection, MEP service chaseways, and direct NC export to multi-axis roll-formers.
Explore TopicExact point loads, continuous line loads (kN/m), overturning moment reactions, and anchor bolt positioning coordinates delivered 3–4 weeks prior to steel shipment.
Explore TopicStreamline your planning approval across Germany (Bauantrag), Italy (Permesso di Costruire/SCIA), France (Permis de Construire), the UK, and Greece with our multilingual engineering desk.
Explore TopicAlready have architectural drawings from your local architect? Our structural engineering department converts your bespoke DWG, PDF, or IFC blueprints into Eurocode-compliant cold-formed steel frames with zero compromise to your architectural vision.
Explore TopicEngineered for extreme coastal hurricane gusts (up to 250 km/h), high Alpine snow accumulations (≥ 3.5 kN/m²), and high seismic ground accelerations (PGA ≥ 0.40g) across Europe.
Explore TopicClear technical answers regarding calculations, drawings, and regulatory submission.
EN 1090-2 is mandatory across the European Union for all load-bearing steel components. It certifies that our factory in Gebze operates under a rigorously audited Factory Production Control system, ensuring absolute structural safety and municipal legal compliance.
Yes. Under EU Regulation 305/2011, a valid CE Declaration of Performance issued by a notified body provides mutual recognition across all 27 EU member states, the UK, Switzerland, and Norway without needing secondary local approvals.
Our CNC roll-formers feature automated optical laser encoders and digital caliper calipers that continuously inspect web width, flange depth, dimple depth, and overall profile length with sub-millimeter precision (±0.5 mm tolerance).
Upload your architectural drawings (PDF/DWG/IFC) to receive a structural feasibility evaluation, foundation interface loads, and manufacturing cost schedule.